What does a timber gate cost, and do you need planning permission?
Buying a gate raises the same two questions every time: what will it cost, and do you need permission to fit it? Here are straight answers from our workshop in Bawtry, Doncaster, where every gate is made to measure.

What a timber gate costs
Three things set the price:
Size. Width and height decide how much timber goes in. Our store lists set sizes, and a size between two listed sizes is priced at the next size up.
Style and build. A straight top garden gate costs less than a fully boarded driveway gate with heavier framing.
Hanging and ironmongery. Hinges, latches and posts are priced separately, so you can match them to the job.
A worked example: our Branton straight top garden gate is listed from £245 to £265, depending on the size and hang you pick. Use the gate price calculator to see the price for your opening.
Need a size that is not on the list? Send us your opening width and height through the contact form, and we will price it by hand.
Do you need planning permission?
In most cases in England, no. These are the usual rules for houses, as we understand them. The rules can change, and your local council has the final say, so check with them if you are unsure.
Gates next to a road or pavement: up to 1 metre high is normally fine without permission.
Gates elsewhere on your property: up to 2 metres high is normally fine.
You may need to apply if your house is a listed building, sits in a conservation area with restrictions, or has had its permitted development rights removed. Flats and some new estates may be covered by these.
Check your deeds too. Some estates have covenants on gates and fences.
A quick call to your council's planning team should settle it, and it usually takes minutes.
Before you order
Measure the opening at the top, middle and bottom, and use the smallest.
Allow for hinges, a latch and clearance above the ground.
Tell us which way you want it to open.
Looking after your gate
Treat your gate before it goes up. We specify Osmo WR4001 base coat, followed by an Osmo top coat. Other finishes, such as Sadolin, can let the timber take up moisture and warp, and they affect your warranty.
Get a price
Use the price calculator, or send your opening size through our contact form, and we will reply with a quote.




Comments